partnerskillo.blogg.se

#CISCO ASA 5505 SOFTWARE 8.4.6 HOW TO#
#CISCO ASA 5505 SOFTWARE 8.4.6 UPGRADE#
#CISCO ASA 5505 SOFTWARE 8.4.6 PASSWORD#
#CISCO ASA 5505 SOFTWARE 8.4.6 PC#

To connect your new VPN, you’ll need the Cisco VPN Client.

Click “Schedule Reload,” Yes, and Exit ASDM.

Be sure to change the radio button at the top to Save the running configuration at the time of reload.

I like to do a reboot while I do this, and we can do it using the Cisco ASDM! Now that we’ve done all that, we should save it from working memory into the flash.

Change the IP address and Netmask to match that of your internal network, the subnet where your servers are located.

Double click the Entry under the Standard ACL tab.

Click the “Manage” button next to Split Tunnel Network List.

Click the Group Policy that corresponds to the one you defined during the Wizard, and click the Edit button.

Click “VPN” on the left side of the screen.

Click “Configuration” at the top of the screen.

One more step, without this you won’t be able to connect to anything besides the internal network when you are connected to the VPN.

Leave NAT Settings blank, but check “Enable Split tunneling” at the bottom and click Next.

IKE Policy defaults are fine, click Next.

Fill in DNS and WINS for your outside network and Click Next.

You can do whatever you want here, but here is my suggestion:

Click “New…” to create a new VPN IP pool.

#CISCO ASA 5505 SOFTWARE 8.4.6 PASSWORD#

Create a username and password for each VPN user, click Next.Select “Authenticate using the local user database,” click Next.Tunnel Group Name: Enter what I’m going to call your “VPN Connection Username,” and Click Next.Select “Pre-shared key,” then fill in what I’m going to call your “VPN Connection Password.” This will be saved in the client and should be as long and secure as possible.Click the “Wizards” drop down, select “VPN Wizard.”.To configure the ASA5505, first log into it using the Cisco ASDM. The remote client doe not need to have an 5505 as a VPN endpoint, it only needs to have the Cisco VPN Client software installed.

#CISCO ASA 5505 SOFTWARE 8.4.6 HOW TO#

Writing file disk0:/asa802-k8.bin… !!!!! (truncated)ġ4524416 bytes copied in 118.This walkthrough will describe how to use your Cisco ASA5505 as a VPN server for a remote client. Assume that we have already downloaded the software file asa802-k8.bin and placed that on our TFTP PC.ĭestination filename ? disk0:asa802-k8.bin Now it’s the time to upload the new software image file to the disk system of the firewall.

Just issue the show run command and copy all configuration output from your terminal window into a text file.

#CISCO ASA 5505 SOFTWARE 8.4.6 PC#

Configure a TFTP server (you can use the free tftpd32) on an internal PC (e.g 192.168.1.10) and backup the current running software image from the firewall to your TFTP PC.Īddress or name of remote host ? 192.168.1.10Īlso, save the current running configuration.

#CISCO ASA 5505 SOFTWARE 8.4.6 UPGRADE#

Now, lets upgrade to version 8.0(2).Īssume that our internal network range is 192.168.1.0/24. Also, the GUI device manager version (ASDM) is 5.2(3). SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03 Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHzĮncryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)īoot microcode : CNlite-MC-Boot-Cisco-1.2 System image file is “ disk0:/asa723-k8.bin” Connect to the appliance (console or SSH) and verify the current running software version by using the show ver command:Ĭisco Adaptive Security Appliance Software Version 7.2(3)Ĭompiled on Wed 15-Aug-07 16:08 by builders